Hi,
I have WD hard drive that the Mac can't write on it, I tried to re-format it so I can do write in Mac however I forgot to back-up so I interrupted the erasing so quickly but now when I plug the Hard drive to any computer it can't read it.
This is the utility log, it may help anyone experienced with this:
2012-08-26 02:38:37 -0500: Disk Utility started.
2012-08-26 02:40:23 -0500: Preparing to erase : “AHMED”
2012-08-26 02:40:23 -0500: Partition Scheme: Master Boot Record
2012-08-26 02:40:23 -0500: 1 volume will be created
2012-08-26 02:40:23 -0500: Name : “AHMED”
2012-08-26 02:40:23 -0500: Size : 1 TB
2012-08-26 02:40:23 -0500: File system : MS-DOS (FAT)
2012-08-26 02:40:25 -0500: Unmounting disk
2012-08-26 02:40:31 -0500: Creating the partition map
2012-08-26 02:40:31 -0500: Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Device not configured
2012-08-26 02:40:31 -0500: Erase complete.
2012-08-26 02:40:31 -0500:
I have WD hard drive that the Mac can't write on it, I tried to re-format it so I can do write in Mac however I forgot to back-up so I interrupted the erasing so quickly but now when I plug the Hard drive to any computer it can't read it.
This is the utility log, it may help anyone experienced with this:
2012-08-26 02:38:37 -0500: Disk Utility started.
2012-08-26 02:40:23 -0500: Preparing to erase : “AHMED”
2012-08-26 02:40:23 -0500: Partition Scheme: Master Boot Record
2012-08-26 02:40:23 -0500: 1 volume will be created
2012-08-26 02:40:23 -0500: Name : “AHMED”
2012-08-26 02:40:23 -0500: Size : 1 TB
2012-08-26 02:40:23 -0500: File system : MS-DOS (FAT)
2012-08-26 02:40:25 -0500: Unmounting disk
2012-08-26 02:40:31 -0500: Creating the partition map
2012-08-26 02:40:31 -0500: Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Device not configured
2012-08-26 02:40:31 -0500: Erase complete.
2012-08-26 02:40:31 -0500: