Mac Pro 6.1 (2013) 1481


Joined
Oct 9, 2020
Messages
11
Reaction score
0
Striping the Mac Pro you need a T5 - T8 - T10 Torx Screwdriver. I think these screws are in the metric measurement not the old imperial fractions of an inch. But what I want to know is the M diametre and length of these screws, there are about a dozen variations of the 3 head sizes. Searched everywhere but found Mac Part No. and T (Torx) No. but not the diameter and length. example M5 x M0.5 (length and diameter). p.s. I even found the torque pressure for each screw.
 
Ad

Advertisements

Cory Cooper

Moderator
Joined
May 19, 2004
Messages
8,731
Reaction score
334
Hello,

I don't think that Apple publishes the actual specs of their screws and fasteners. Maybe there is some information on the iFixit site for that model: iFixit - Mac Pro 2013 Repair. Or, they may have that information if you contact them.

Hope that helps.

C
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top