- Joined
- Jun 12, 2020
- Messages
- 1
- Reaction score
- 0
I have an early 2008 iMac (A1225 (EMC 2211) IMac8,1 24") Ser Nbr VM 8220 RUZE7 with a dead PCB. The original is a Liteon, Ref 8202A8QC Rev 0H, whilst the replacement is a Delta, Ref 614-0416.
Unfortunately, the very small connectors (I think it is from the temperature sensor) are different.
I was previously sent an early 2009 PCB in error, the connector on that is the same as the Liteon.
Has anybody come across this problem, if so how solved?
Unfortunately, the very small connectors (I think it is from the temperature sensor) are different.
I was previously sent an early 2009 PCB in error, the connector on that is the same as the Liteon.
Has anybody come across this problem, if so how solved?